Worksite and Equipments
Inspection Equipment
Technical Data
| Type | ES-CMM866 |
| Processing range |
Horizontal X travel distance 600mm |
| Outline dimension | 1735X1150X2647 |
| Length measure system | RENISHAW/HEIDENHAIN open grating ruler, resolution ratio 0.1μm |
| MPEe(um) | 2.8+L/300 |
| MPEp(um) | 3.5 |
Drilling machine
Radial Drilling Machine Z3050
Technical Data
| MAX diameter of the hole | 50mm(Cast iron) |
| Distance between central line of spindle axis to column bus |
MAX 2000mm |
| Horizontal moving distance of the spindle box | 1650mm |
| Distance between spindle end surface and working platform of the base |
MAX 1570mm |
Strong bench drilling machine Z4025K
Technical Parameter
| Max. diameter of the hole | 最大 25mm |
| Span | 235mm |
| Max. travel distance of spindle | 125mm |
| Max. taper of spindle nose | M.T3 |
| Spindle nose surface to table surface | 140-490 |
| Motor power | 0.85/1.1 |
| Rotate speed of motor | 910/1450 |
Bench drilling machine Z4116
Technical Parameter
| Max. diameter of the hole | 16mm |
| Max. travel distance of spindle | 125mm |
| Max. taper of spindle nose | MT.2 |
| Max. lift distance of platform | 210mm |
Bench drilling machine Z4120
Technical Parameter
| Max. diameter of the hole | 20mm |
| Max. travel distance of spindle | 125mm |
| Max. taper of spindle nose | MT.2 |
| Max. lift distance of platform | 210mm |
Grinder
M1432B universal cylindrical grinder
Technical Parameter
| Grinding diameter |
OD 8～320mm |
| Grinding length |
OD 750，1000，1500，2000，3000mm |
| Center height | 180mm |
| Max. load of work piece | 150kg |
M7130D/H surface grinder
Technical Parameter
| Distance from spindle to platform |
Max 575mm |
| Grinding dimension |
L 1000mm |
| Max. load of work piece | 500kg |
MM1040A centerless grinding machine
Technical Parameter
| Rang of vertical feed grinding |
Diameter 1.5 ～ 40mm |
| Rang of transverse feed grinding |
Diameter 1 ～ 40mm |
| Precision of standard test bar grinding（? 20 × 75 ） |
circular degree 1.5 μ m |
Welding machine
Carbon Dioxide Gas Welding Machine
Technical Data
| Power supply voltage | hree-phase 380V±15% |
| Diameter of the wire | 0.8-1.0mm |
| The thickness of the plate can be welded | ≥0.8mm |
